Green Light Sights Adhesive-backed
$49.00
General information: Want to use our sights, but need a more cost friendly option? Consider our adhesive sights. The sights are backed with 3M industrial tape so they won’t come off without a lot of force. Advantages: Less expensive. Large size is easier to see. Disadvantages: No housing to protect the optic. To access the back plate, you will have to remove the optic and the adhesive won’t work twice (but how often do you remove a slide’s backplate…). Clean gently with a microfiber cloth.
Compatibility: Sig p365 compatible with: P365, P365X, P365 XL, P365 SAS, P365 Fuse, P365 XMacro and P365 AXG. P320 compatible with: P320, P320-M17 and P320-M18. For the Springfield Echelon, order the Glock Gen 5.
Lifetime: Adhesive optics have a lifetime of about 800 rounds after which point, the adhesive may separate from the optic causing white spots. For most EDC folk, this is years of use. If you are an avid shooter and shoot 1,000s of rounds from your gun, our adhesive option is not for you. Choose our full size snap in and tactical models instead.
How to install: Take a look at the photos so you see where they are placed. You can remove the optic if you place it poorly… if you do it very quickly (within seconds), but once it starts to set, removing it will weaken the bond. So, take your time and get it lined up right the first time. Full strength cure happens in 72 hours. If you want something that will last forever, get our snap in versions. Our lifetime warranty does not apply to adhesive backed optics.
For Glock models: Clean the back of your slide with rubbing alcohol and let dry. Lock your slide in the rear position. Remove the optic liner and carefully position the optic so that it does not cover the slide channels. The rounded corners go on top.
For Sig p365 and Hellcat models: Remove the rear slide plate cover, clean with rubbing alcohol and let dry. Remove the optic liner and carefully place over the rear plate. You can try to place it with the slide plate on the gun, but it is easier to line it up correctly if the slide plate is removed.
For Sig p320: You will need to purchase another back plate that is flush (no recessed area). We suggest https://ndzperformance.com/ndz-performance-rear-plate-sig-sauer-p320-sig-p320-rp-v/. Then apply like the Sig p365.